Jannis
4a769bf50f
- BLE GATT communication via bleak (UART-over-GATT, service 0xff00) - Parses 0x03 (general info) and 0x04 (cell voltages) frames - Protocol verified against official RS485/UART spec V4 - DataUpdateCoordinator with 5s poll interval (configurable 2-60s) - Auto-reconnect on BLE disconnect - Config flow: BT auto-discovery + manual MAC entry + options flow - Sensors: voltage, current, power, SoC, capacity, cycles, temps, cells, cell delta - HACS-ready (hacs.json, manifest.json) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
193 lines
7.2 KiB
Python
193 lines
7.2 KiB
Python
"""BLE GATT communication handler for the Xiaoxiang Smart BMS."""
|
||
from __future__ import annotations
|
||
|
||
import asyncio
|
||
import logging
|
||
import struct
|
||
|
||
from bleak import BleakClient, BleakError
|
||
|
||
from .const import (
|
||
FRAME_END,
|
||
FRAME_START,
|
||
RX_CHAR_UUID,
|
||
TX_CHAR_UUID,
|
||
)
|
||
|
||
_LOGGER = logging.getLogger(__name__)
|
||
|
||
# Full frame layout:
|
||
# [0xDD] [CMD] [STATUS] [PAYLOAD_LEN] [PAYLOAD...] [CHK_HI] [CHK_LO] [0x77]
|
||
# Header = 4 bytes, trailer = 3 bytes (checksum × 2 + end marker)
|
||
_HEADER_LEN = 4
|
||
_TRAILER_LEN = 3
|
||
|
||
|
||
class BmsBluetoothHandler:
|
||
"""Manages BLE connection and protocol framing for a Xiaoxiang BMS device."""
|
||
|
||
def __init__(self, address: str) -> None:
|
||
self._address = address
|
||
self._client: BleakClient | None = None
|
||
self._buffer = bytearray()
|
||
self._response_event = asyncio.Event()
|
||
self._response_data: bytes | None = None
|
||
self._lock = asyncio.Lock()
|
||
|
||
# ------------------------------------------------------------------
|
||
# Connection management
|
||
# ------------------------------------------------------------------
|
||
|
||
@property
|
||
def is_connected(self) -> bool:
|
||
return self._client is not None and self._client.is_connected
|
||
|
||
async def connect(self) -> None:
|
||
"""Open BLE connection and start notifications."""
|
||
if self.is_connected:
|
||
return
|
||
_LOGGER.debug("Connecting to BMS at %s", self._address)
|
||
self._client = BleakClient(
|
||
self._address,
|
||
disconnected_callback=self._on_disconnect,
|
||
)
|
||
await self._client.connect()
|
||
await self._client.start_notify(RX_CHAR_UUID, self._on_notify)
|
||
_LOGGER.debug("Connected to BMS at %s", self._address)
|
||
|
||
async def disconnect(self) -> None:
|
||
"""Close the BLE connection cleanly."""
|
||
if self._client:
|
||
try:
|
||
await self._client.disconnect()
|
||
except Exception:
|
||
pass
|
||
self._client = None
|
||
|
||
def _on_disconnect(self, _client: BleakClient) -> None:
|
||
_LOGGER.debug("BMS at %s disconnected", self._address)
|
||
self._client = None
|
||
|
||
# ------------------------------------------------------------------
|
||
# Frame reception
|
||
# ------------------------------------------------------------------
|
||
|
||
def _on_notify(self, _char, data: bytearray) -> None:
|
||
"""Accumulate BLE notification chunks into complete protocol frames.
|
||
|
||
BLE max payload is 20 bytes (default MTU), so a single BMS frame
|
||
(up to ~50 bytes for 16 cells) arrives across several notifications.
|
||
We buffer until we can calculate and verify the expected frame length.
|
||
"""
|
||
self._buffer.extend(data)
|
||
|
||
# Discard leading garbage until we see a frame start byte
|
||
while self._buffer and self._buffer[0] != FRAME_START:
|
||
self._buffer.pop(0)
|
||
|
||
# Need at least the 4-byte header to know payload length
|
||
if len(self._buffer) < _HEADER_LEN:
|
||
return
|
||
|
||
payload_len = self._buffer[3]
|
||
expected_total = _HEADER_LEN + payload_len + _TRAILER_LEN
|
||
|
||
if len(self._buffer) < expected_total:
|
||
return # still waiting for more chunks
|
||
|
||
frame = bytes(self._buffer[:expected_total])
|
||
del self._buffer[:expected_total]
|
||
|
||
if frame[-1] != FRAME_END:
|
||
_LOGGER.warning("BMS frame missing end marker, discarding: %s", frame.hex())
|
||
return
|
||
|
||
if frame[2] != 0x00:
|
||
_LOGGER.warning("BMS returned error status 0x%02X for cmd 0x%02X",
|
||
frame[2], frame[1])
|
||
return
|
||
|
||
_LOGGER.debug("BMS frame received (cmd=0x%02X, len=%d)", frame[1], payload_len)
|
||
self._response_data = frame
|
||
self._response_event.set()
|
||
|
||
# ------------------------------------------------------------------
|
||
# Request / response
|
||
# ------------------------------------------------------------------
|
||
|
||
async def request(self, command: bytes, timeout: float = 5.0) -> bytes | None:
|
||
"""Send a command frame and wait for the corresponding response frame."""
|
||
async with self._lock:
|
||
self._response_event.clear()
|
||
self._response_data = None
|
||
try:
|
||
await self._client.write_gatt_char(TX_CHAR_UUID, command, response=False)
|
||
except BleakError as exc:
|
||
_LOGGER.error("BLE write failed: %s", exc)
|
||
return None
|
||
try:
|
||
await asyncio.wait_for(self._response_event.wait(), timeout)
|
||
return self._response_data
|
||
except asyncio.TimeoutError:
|
||
_LOGGER.warning("BMS response timeout (cmd=%s)", command.hex())
|
||
return None
|
||
|
||
# ------------------------------------------------------------------
|
||
# Frame parsers
|
||
# ------------------------------------------------------------------
|
||
|
||
@staticmethod
|
||
def parse_general_info(frame: bytes) -> dict:
|
||
"""Parse a 0x03 general info response frame.
|
||
|
||
Payload byte offsets (frame[4] is payload[0]):
|
||
0-1 Total voltage uint16 BE ÷100 → V
|
||
2-3 Current int16 BE ÷100 → A (positive = charging, negative = discharging)
|
||
4-5 Residual capacity uint16 BE ÷100 → Ah
|
||
6-7 Nominal capacity uint16 BE ÷100 → Ah
|
||
8-9 Cycle count uint16 BE
|
||
10-11 Production date (ignored)
|
||
12-15 Balance status (ignored)
|
||
16-17 Protection status (ignored)
|
||
18 Software version (ignored)
|
||
19 State of charge uint8 %
|
||
20 MOS status uint8
|
||
21 Cell count uint8
|
||
22 Temp probe count uint8
|
||
23+ Temperatures uint16 BE each (raw − 2731) ÷ 10 → °C
|
||
"""
|
||
p = frame[_HEADER_LEN:-_TRAILER_LEN]
|
||
|
||
temp_count = p[22]
|
||
temperatures: list[float] = []
|
||
for i in range(temp_count):
|
||
raw = struct.unpack_from(">H", p, 23 + i * 2)[0]
|
||
temperatures.append(round((raw - 2731) / 10.0, 1))
|
||
|
||
return {
|
||
"voltage": round(struct.unpack_from(">H", p, 0)[0] / 100.0, 2),
|
||
"current": round(struct.unpack_from(">h", p, 2)[0] / 100.0, 2),
|
||
"residual_capacity": round(struct.unpack_from(">H", p, 4)[0] / 100.0, 2),
|
||
"nominal_capacity": round(struct.unpack_from(">H", p, 6)[0] / 100.0, 2),
|
||
"cycle_count": struct.unpack_from(">H", p, 8)[0],
|
||
"state_of_charge": p[19],
|
||
"cell_count": p[21],
|
||
"temperatures": temperatures,
|
||
}
|
||
|
||
@staticmethod
|
||
def parse_cell_info(frame: bytes) -> dict:
|
||
"""Parse a 0x04 cell voltage response frame.
|
||
|
||
Per spec: frame[3] (the header length byte) = cell_count × 2.
|
||
The payload contains ONLY the voltage bytes — no count byte.
|
||
0+ Cell voltages uint16 BE each unit mV ÷1000 → V
|
||
"""
|
||
count = frame[3] // 2 # header length byte = N_cells × 2
|
||
p = frame[_HEADER_LEN:-_TRAILER_LEN]
|
||
voltages: list[float] = []
|
||
for i in range(count):
|
||
raw = struct.unpack_from(">H", p, i * 2)[0]
|
||
voltages.append(round(raw / 1000.0, 3))
|
||
return {"cell_voltages": voltages}
|